Welcome to the Garden Ninja Gardening Forum! If you have a gardening question that you can't find answers to then ask below to seek help from the Garden Ninja army! Please make your garden questions as specific and detailed as possible so the community can provide comprehensive answers in the online forum below.

Welcome to the ultimate beginner gardening and garden design forum! Where no gardening question is too silly or obvious. This online gardening forum is run by Lee Burkhill, the Garden Ninja from BBC 1's Garden Rescue and a trusted group of experienced gardeners.

Whether you are a beginner or an expert gardener, it's a safe place to ask garden-related questions for garden design or planting. If you have a problem in your garden or need help, this is the Garden Forum for you!

Garden Ninja forum ask a question

Posting Rules: This space is open for all garden-related questions. Please be polite, courteous and respectful. If you wouldn't say it to your mum's face, then don't post it here. Please don't promote, sell, link spam or advertise here. Please don't ask for 'cheeky' full Garden redesigns here. They will be deleted.

If you need a garden design service, please use this page to book a design consultation. I will block anyone who breaks these rules or is discourteous to the Garden Ninja Community.

Join the forum below with your gardening questions!

Please or Register to create posts and topics.

Water butt/pump/sprinkler system

Hi there,

I have a challenge in getting a sprinkler to cover my 300 square meters lawn. 

The problem is that no matter what sprinkler I buy (and no matter what the coverage details they give on their labels), my mains water pressure from the garden tap means that the most I can cover is around 40 sq.meters.

This means that wishing to give a 20 minute hose to the garden each evening ends up taking me over 2 hours as I move the sprinkler around to ensure an even coverage.

I'd hoped I could buy a water pump that I could plug into the garden tap to boost pressure but apparently this is not possible so I'll need to buy a water butt as the source of water which will then go through the pump to my hose/sprinkler.

Understandably, all the pump suppliers I have spoken to are nervous about recommending a pump as with so many variables (size of water butt, length of hose, amount of pressure used, amount of water required), it would be easy to miscalculate and either spend money on something that doesn't work or burn out the pump if there is insufficient water at source.

Has anyone found a way around this or know of a place to go where they are experienced in giving all the advice needed?

Thanks very much

 

Hi @rob-w6

Thanks for your question. The first thing is ask is ‘is this a new lawn?’  The reason being is I would never water an established lawn. Even in a heat wave. They may go brown and crispy but they rarely give up the ghost  

Contrary to popular belief it’s a complete waste of water and time watering established turf in most cases. Yes your grass stays green during heatwaves but it’s a huge waste of resources given that grass is one of the toughest plant species and water supplies are in scarce demand around the globe now due to rising populations, temperatures etc. 

As Garden Ninjas we aim to have a positive impact on the environment. Only newly laid turf needs watering. 

Using a water butt and pump for such an area of new turf is suitable however you’ll soon get through a water butt worth of water on that size of turf. So it will need refilling frequently. 

The issue you’ll have is the longer the hose the less pressure there is even with a pump.  So what starts off as high pressure after 50m up starts to lower and lower.

If you need to water that volume of newly laid turf it’s best to fit a temporary seep hose instead. Theres less wastage, they don’t need as much pressure and it can help establish a large new lawn. You can watch more on this below. 

https://youtu.be/81muXEWDe9I

Happy gardening!

Lee

Online garden design courses

Share this now!